Cubitron Abrasive Belts

Anyone who professionally grinds skis knows the problem: grinding belts that become dull after only a few uses, uneven grind patterns, and too much heat on the base. The solution is Cubitron – and at Heba-Sport-Tec, they are available in grits 80, 100, and 120 in various lengths.

—

A perfectly ground ski base doesn't start on the slopes – it starts in the workshop. And that's where the sanding belt makes the difference. Once you've worked with Cubitron, you won't go back to conventional sanding belts. The reason: the technology behind it is fundamentally different.

—

## What is behind Cubitron technology?

Conventional abrasive belts use irregularly shaped abrasive grains that furrow the material rather than cut it. This generates heat, leaves an uneven finish, and the grains quickly become dull.

The Cubitron abrasive belts are characterized by precisely triangularly shaped and uniformly vertically arranged abrasive grains. These remove material like small knives and sharpen themselves in the process.

The result: less heat on the ski base, a more even finish, and a significantly longer belt life. Thanks to patented Cubitron technology, the grinding process achieves an extremely fast cut—with up to 40% time savings and a service life two to seven times longer than other products.

For ski service, this means: more ski grinding, fewer base repairs, better results.

—

## The right grit for every step

At Heba-Sport-Tec, we carry Cubitron grinding belts in three grits – tailored to the different steps in ski servicing:

### 80-grit – Pre-sanding and surface repair
The coarsest of the three grits. Ideal for the first pass after significant base damage, for flat grinding old or heavily damaged bases, and for creating the base structure in professional stone grinding. Grit 80 removes material quickly and efficiently – without overheating the base.

### Grit 100 – All-purpose for daily ski maintenance
The most used grit in daily service. Grit 100 is suitable for regular maintenance grinding, shapes the base and optimally prepares it for fine grinding. Those who grind multiple skis daily – whether in club service or in a retail store – most often reach for the 100.

### 120-grit – Fine sanding and surface preparation
The finest grit for the final polish. Grit 120 smooths the surface, removes scratches from pre-grinding, and optimally prepares the base for subsequent waxing. The 120 grit is indispensable, especially for competition skis where a uniform structure is crucial.

—

## Various lengths for each machine

Not every belt sander is the same – that's why we offer Cubitron belts in different lengths. Whether for a benchtop machine, a standalone unit, or a professional belt sander for workshop operations – you'll find the right format at Heba-Sport-Tec.

**Important:** Before ordering, please check your machine documentation to determine the required tape length and width for your device. We are happy to assist you with any questions.

—

## When should you replace the sanding belt?

Even a Cubitron doesn't last forever. These signs show it's time for a new disc:

– **Uneven Grinding** – Grooves or waves in the coating after grinding
– **The topping gets too warm** – Discoloration or soft spots after grinding
– Grinding speed decreases – more pressure needed for the same result
Visible wear – torn grains or cracks in the belt

Thanks to Cubitron technology, this occurs much later than with conventional belts – but the time will come. A fresh belt is immediately noticeable in the grinding pattern.

—

## Cubitron Compared – Is It Worth the Investment?

Cubitron abrasive belts cost a bit more than standard products. But the math quickly adds up:

Anyone who calculates will quickly realize: Fewer tape changes, faster work, and better results more than make up for the extra cost.

—

## Cubitron sanding belts at Heba-Sport-Tec

We stock Cubitron abrasive belts in:

– **Grit 80** – various lengths
– **Grit 100** – various lengths
– **Grit 120** – various lengths

Fast delivery throughout Switzerland – so your ski service doesn't stand still.

👉 [Buy Cubitron abrasive belts now](https://heba-sport-tec.ch)

—

Questions about the right grit or belt size for your machine? Our team will be happy to help – via email or directly in the shop.

—

## Frequently Asked Questions About Cubitron Abrasive Belts

What makes Cubitron grinding belts special?
The patented technology with precision-formed ceramic grains enables faster, cooler grinding and significantly longer tool life than conventional abrasive belts.

What grit do I need for ski servicing?
For pre-grinding and larger repairs: grit 80. For daily maintenance grinding: grit 100. For fine grinding and competition skis: grit 120.

How long does a Cubitron sanding belt last?
Depending on the application and machine, a Cubitron belt lasts two to seven times longer than a conventional sanding belt.

Will the belts fit my sander?
We offer various lengths. You can find the right size in your machine's documentation – we're happy to help if you have questions.

Where can I buy Cubitron sanding belts in Switzerland?
Directly at Heba-Sport-Tec on heba-sport-tec.ch – in stock, fast delivery throughout Switzerland.

—

## Compatibility – Which belt fits which machine?

So that you order the right tape right away, we have summarized the common machines in ski servicing with the corresponding tape dimensions:

### Wintersteiger
Wintersteiger is one of the best-known manufacturers of ski service machines worldwide. The SNB series belt grinders are used in many ski schools, specialist shops, and service centers:

Machine | Band measurement
|———-|———-|
| **SNB 60** | 5.9 × 78.7 in |
SNB 80 200 × 1500 mm
| **Trim 100** | 11.81 × 78.74 in |
Sigma Eco / Tunejet SB | 300 × 2000 mm

### RoffB
RoffB's Italian wet belt grinders are known for their compact design and reliable quality. The entire LM18 series, as well as the LRC35 models, use the same belt format:

For the side edge (models with BSG or SK): **20 × 1200 mm**

### Montana
Montana (Ernst Knoll Feinmechanik) offers both manual machines and fully automatic service robots. The belt size of the manual MONTY BELT as well as the Profi B VARIO is:

—

**Note:** We recommend always checking the machine documentation before ordering – especially with older or modified machines, dimensions can vary. If you are unsure, our team will be happy to assist you.

👉 [Order Cubitron sanding belts in the right size](https://heba-sport-tec.ch)